ZetaCube ZT-ESS-1044kWh_C&I Energy Storage System_Products

1044kWh

Custom C&I Energy Storage System Solution

Inquiry

Battery Cabinet

Flexible configuration for use; Supports up to 20 battery clusters in parallel, supports configurations for 2, 3, 4, 6, 8, 16 hours of operation, etc.
Custom Electrical Cabinet

Standard configuration: 4×125kW PCS or 125kW PCS+250kW STS+120kW MPPT; Supports selected MPPT, STS, ATS, etc.
Multi-Scenario Applications

Meets peak shaving and valley filling, emergency backup power, peak regulation, frequency regulation, solar-diesel energy storage microgrid and other application scenarios.

DC battery parameters: Cell type
LiFePO Battery, 3.2V/314Ah; Battery PACK configuration
1P52S/52kWh; Battery system configuration
4P260S; Battery voltage range (V)
702-936; Battery system capacity (kWh )
Rated capacity: 1044; Temperature detection
Cell + Aluminum Busbar
System Parameters: DC side system efficiency (%)
≥95; Charge-discharge rate
≤0.5C; DC input protection
Load switch + Fuse; Fire protection system
Novec 1230 + Water fire protection (optional)
General Parameters: Dimensions (Width × Depth × Height) (mm)
4000*1383*2189 (Main body); Allowable ambient temperature (°C )
-30～50 (Derating when the temperature is higher than 45); Allowable relative humidity (%)
< 95 (No condensation); Allowable altitude (m)
3000 (Derating when the altitude is higher than 2000); Weight (kg)
9420±60/9820±60 (With packaging); Protection class/Ingress protection rating
IP55; Cooling method
Liquid cooling; Cycle life
8000 cycles
Communication: Communication interface
RS485/Ethernet; Communication protocol
IEC61850/MODBUS-RTU/MODBUS-TCP